NI myRIO

Portable, Embedded Student Design Device – Leveraging industry standard reconfigurable I/O (RIO) technology from National Instruments, NI myRIO places the power of real time performance and customizable I/O in the hands of students.

Contact A Representative

Features

  • Fully programmable FPGA through the LabVIEW FPGA Module

  • Additional port for USB peripherals

  • Comprehensive ecosystem of sensors and actuators

  • Code deployment over USB and WiFi

  • Minutes to first measurement with enhanced getting started experience

  • Onboard devices, WiFi and USB port for Connectivity to USB devices

  • Up to 40 lines of digital I/O, 10 analog input channels, and 6 analog output channels for
    connectivity to sensors and actuators

  • Program the processor with LabVIEW or C/C++

  • Simplify FPGA programming with LabVIEW graphical software

  • Customize with a downloadable library of FPGA personalities

  • Easily switch from simulation to real-world implementation

Qube Servo 2.0 for myRIO

Features

  • Compact and integrated rotary servo system
  • Tool-less quick connect module inter face
  • Direct-drive brushed DC motor
  • High resolution optical encoder
  • Built-in voltage amplifier with integrated current and tachometer sensors
  • Fully documented system models and parameters provided for LabVIEW

Courseware

Inertia Disk Module

  • Stability Analsis
  • Second-order systems
  • Routh-Hurwitz Stability
  • Nyquist Stability
  • PD Control
  • Lead Compensator + 15 more topics.

Pendulum Module

  • Moment of Intertia
  • Pendulum Modeling
  • State-space Modeling
  • Swing-up Control
  • LQR State-feedback balance control
  • Pole-placement state-feedback balance control

myRIO Starter Kit

  • Includes sensors and components needed for basic projects
  • Devices covered in the online version of the NI myRIO Project Essentials Guide
  • Power connector with leads for connection to stand-alone power supplies

This kit includes the following items:

  • 7-segment display
  • Small DC motor (1 VDC to 3 VDC, no load speed: 6600 rpm)
  • 2 Hall effect sensors (latch and switch)
  • Mechanical rotary encoder
  • Force sensing resistor and Potentiometer (500 kΩ)
  • Thermistor (NTC: 10 kΩ, 25 degrees)
  • Diodes
  • Photo interruptor (light sensor with LED)
  • Microphone with audio jack
  • Relay
  • Assorted Resistors, Capacitors, Transistors, op-amps
  • Assorted LEDs, Switches (DIP, slide, and rotary)
  • Piezoelectric sensor
  • Photocell
  • Buzzer
  • MXP Breadboard Accessory
  • Wire kit

myRIO Embedded kit

  • Includes sensors, devices, and display for teaching and implementing embedded systems concepts
  • Designed as an add-on to the NI myRIO Starter Kit
  • Contains components with a variety of digital interfaces (SPI, I2C, UART)
  • Devices covered in the online version of the NI myRIO Project Essentials Guide

 

This includes the following items:

  • RFID reader kit
  • Numeric keypad
  • LED matrix
  • Digital potentiometer
  • Character LCD (UART or SPI)
  • Digital temperature
  • EEPROM

myRIO Mechatronics kit

  • Includes motors, sensors, and components for teaching and implementing mechatronics concepts
  • Designed as an add-on to the NI myRIO Starter Kit
  • Devices covered in the online version of the NI myRIO Project Essentials Guide

 

This includes the following items:

  • Ultrasonic range finder (accurate readings of 0 in. to 255 in. or 6.45 m)
  • Compass
  • Servo motor: standard (215 degrees rotation)
  • Servo motor: continuous rotation
  • Accelerometer (3 axis, digital – SPI and I2C)
  • H-bridge driver (compatible with gear motor)
  • Gyroscope (3 axis, digital – SPI and I2C)
  • Infrared proximity sensor (10 cm to 80 cm)
  • Ambient light sensor (SPI)
error: Content is protected !!